Controller

Controller
Motorsteuerungen von Kelly
Anzeige pro Seite
Sortieren nach
RS232 Adapter Cont.-PC

Programm zum download.

19,00 € *

Auf Lager



Kelly "mini"

Kelly "mini"

 

sehr kleiner kompakter Controller.

 

für Reihenschluß, PM und BLDC Motoren

 

Ab 84,95

 

Wassergeschützt 19.- Aufpreis

84,95 € *



Controller 72 V 800A Reku

High power Controller.

 

Für PM / Series Motor.

Bei einem permanentmagnet Motor mit Reku.

 

frei programierbar.

 

General Specifications:
•Frequency of Operation: 16.6kHz.
•Standby Battery Current: < 0.5mA.
•Controller supply voltage range, PWR, 10 to 30V(24V is preferred).
•Supply Current, 200mA @ 12V, or 2.5W.
•Configurable battery voltage range, B+. Max operating range: 18V to 90V.
•Standard Throttle Input: 0-5 Volts(3-wire resistive pot), 1-4 Volts(hall active throttle).
•Analog Brake and Throttle Input: 0-5 Volts. Producing 0-5V signal with 3-wire pot.
•Reverse Alarm, Main Contactor Coil Driver, Meter.
•Full Power Temperature Range: 0℃ to 50℃ (controller case temperature).
•Operating Temperature Range: -30℃ to 90℃, 100℃ shutdown (controller case temperature).
•Motor Current Limit, 1 minutes: 800A
•Motor Current Limit, continuous: 360A

879,00 € *



Controller 48V 400A

Als Ersatz für Cityel oder Golfcart

Gehäuseabmessungen entsprechen Curtis 1204

 

General Specifications:

• Frequency of Operation: 16.6 KHz.
• Standby Battery Current: < 0.5mA.
• Controller power supply current, PWR, <150mA.
• Configurable battery voltage range, B+. Max operating range: 18V to 60V.
• Standard Throttle Input: 0-5K(2-wire resistive pot), 0-5V (3-wire resistive pot), 1-4V (hall active throttle).
• Analog Brake and Throttle Input: 0-5V or 0-5K.
• Reverse Alarm, Main Contactor Coil Driver, Meter.
• Full Power Operating Temperature Range: 0℃ to 50 ℃ (controller case temperature).
• Operating Temperature Range: -30℃ to 90 ℃, 100C shutdown (controller case temperature).
• Motor Current Limit, 1 minute: 400A.
• Motor Current Limit, continuous: 160A.

329,00 € *



BLDC 2,2Kw

Passt für die meisten China Roller

 

General Specifications:
•Frequency of Operation: 16.6kHz.
•Standby Battery Current: < 0.5mA.
•5V Sensor Supply Current: 40mA.
•Controller supply voltage range, PWR, 18V to 90V.
•Supply Current, PWR, 150mA.
•Configurable battery voltage range, B+. Max operating range: 18V to 60V.
•Analog Brake and Throttle Input: 0-5 Volts. Producing 0-5V signal with 3-wire pot.
•Full Power Operating Temperature Range: 0℃ to 50℃ (controller case temperature).
•Operating Temperature Range: -30℃ to 90℃, 100℃ shutdown (controller case temperature).
•Peak Phase Current, 10 seconds: 150A.
•Continuous Phase Current Limit: 60A.
•Maximum Battery Current: Configurable

179,00 € *



Sevcon Controller Gen 4 Size 6

Neu

     Motor Controller for Induction Motor, PMAC or IPM  Motor
     39 V minimum and 120V maximum Battery Voltage
     Continuous current: 220A
     Continuous current: 350A (water cooling or force air cooling)
     Boost Current: 660A (10 sec)
     Encoders supported: Sin/Cos, UVW and AB
     8 Digital inputs
     3 Analogue inputs (one for Motor Temp)
     3 outputs
     CAN bus communications

pre programmed for Engiro Motor 205A-04016

 

Mengenrabatt möglich. Bitte anfragen.

1.098,00 € *

Versandgewicht: 5,2 kg
Durch Produkte blättern
* Preise inkl. MwSt., zzgl. Versand